Spotlights and downlights
Recessed lights in gypsum ceilings, fitted with the right cut-out and a driver that suits the lamp.
LED & light fixing in Dubai
LED light installation in Dubai that does not flicker by next month
LED light installation in Dubai looks simple until the new spotlights flicker, the strip lights go patchy or the dimmer buzzes. Most of those faults come from the wrong driver or a poor connection, not the bulb. Our electricians fit spotlights, chandeliers, cove LED strips and outdoor lights properly the first time. Send a photo on WhatsApp for a price.
- Spotlights, chandeliers and LED strips
- Drivers and dimmers matched to the lamps
- Fitted by our electricians
Qualified tradeElectrical work by electricians
TestedEvery circuit checked
Price on WhatsAppSend a photo first
Clean finishDust cleared after
What we fit
Lights we install and repair
Every type of light has its own weak spot. Knowing it is most of the job.
Cove and LED strip lighting
Hidden strips in ceiling coves, under cabinets and behind mirrors, with drivers placed where they can be reached.
Chandeliers and pendants
Heavy fittings hung from the slab, not the false ceiling, and balanced so they hang straight.
Outdoor and balcony lights
Wall lights, garden spikes and balcony fittings rated for sun, dust and water.
Common faults
Why new LED lights misbehave
LED lights should last for years. When they do not, one of these is usually why.
Flickering
Usually a driver that does not match the lamps, a dimmer not made for LEDs, or a loose connection.
LEDs dying early
Heat kills LEDs. Spotlights buried in insulation or fitted in a closed ceiling with no airflow burn out fast.
Buzzing dimmer
Older dimmers were built for bulbs that used far more power. With LEDs they buzz, flicker or will not dim smoothly.
Patchy LED strips
Long strips fed from one end lose brightness towards the far end. They need power fed in at more than one point.
Lights tripping the breaker
A trip when the lights switch on points to a fault in a fitting, a damaged cable or water in an outdoor light.
Fittings too hot to touch
Very hot fittings are a warning sign. It can be the wrong lamp for the fitting or a failing connection, and it should be checked.
Before you buy lights
Four things to check before you buy new lights
Most lighting problems start in the shop. These checks save a second trip.
1
Warm, neutral or cool white?
Warm white suits bedrooms and living areas. Cool white suits kitchens and work areas. Mixing them in one room rarely looks right.
Good to know:
The colour is shown on the box in kelvin. Lower numbers are warmer.
2
Is it dimmable?
If you want to dim the lights, both the lamps and the dimmer have to be LED-compatible.
3
Is it rated for outdoors or bathrooms?
Outdoor and bathroom lights need a suitable IP rating against dust and water.
Why it matters:
Water in a fitting that is not rated for it is a safety risk.
4
Does it come with a driver?
Many spotlights and strips need a separate driver. Check it is included and matched to the lamps.
Replacing a lot of lights?
Send a photo
If you are changing most of the lights in a flat, send the list and photos in one message. We can price it all together and fit it in one visit.
General guidance for Dubai property owners and tenants.
How it works
From photo to lights on
You know the price before the power goes off.
01
01
Send photos
A photo of each light or ceiling, and the fittings if you have already bought them.
02
02
Price on WhatsApp
We reply with a price and a time slot.
03
03
Fit and connect
Power isolated, fittings fixed securely and drivers placed where they can be reached.
04
04
Test with you
Every light switched on and dimmed with you before we leave.
FAQ
LED and light fixing questions
It depends on the number and type of lights and how they are fixed. Send photos on WhatsApp and we reply with a price.
Yes. Send a photo or a link so we can check what fixing and driver they need before we come.
Usually the dimmer or driver does not match the lamps, or a connection is loose. We test the circuit to find which.
Not from the gypsum alone. Heavy fittings need fixing to the concrete slab above or to a support built into the ceiling.
Yes. Our electricians fit spotlights and cove strips as part of false ceiling projects, so the lighting is planned before the ceiling is closed.
Most of Dubai, including Deira, Bur Dubai, Al Nahda, Al Qusais, Al Barsha, Dubai Marina, JLT, Business Bay, Mirdif and Silicon Oasis, with no travel charge inside any of them.
LED & Light Fixing Across Dubai
No travel charge inside any of these areas.
- Deira
- Bur Dubai
- Al Nahda
- Al Qusais
- Karama
- Satwa
- Jumeirah
- Al Barsha
- Dubai Marina
- JLT
- Business Bay
- Downtown
- Silicon Oasis
- Mirdif
- Sports City
- Discovery Gardens
- Al Warqa
- International City
Book an electrician
Show us the lights
A photo of each light, ceiling or fitting and a line about what you want is enough to start. We reply on WhatsApp with a price.
- Sat to Thu, 8am to 8pm
- Friday from 2pm
- Reply inside 15 minutes
- Cash, card or bank transfer
Other trades
Often booked with new lighting
New lights often come with a ceiling change or a fresh coat of paint. Booked together, the trades follow each other.