A breaker that trips and will not hold
Something on that circuit is drawing more than it should, or there is a short. A breaker that holds after three resets has not been fixed, it has been persuaded. Switch that circuit off until it is tested.
Electrical works in Dubai
An electrician in Dubai, because resetting the breaker is not a repair
Breakers that trip, sockets that stopped working, DB boards that feel warm and lights that flicker. Every one of those is a circuit telling you something. Our Dubai electricians test to find out what, then fix the cause rather than the symptom.
- Same-day callout before 3pm
- Circuit testing included, not extra
- Building NOC handled
Our own electriciansEmployed, not subcontracted
We test before we quoteEvery circuit, every time
Same-day calloutBook before 3pm
Warranty on every repair30 days on call-outs
Common faults
What your electrics are telling you
Electrical faults rarely appear out of nowhere. These are the warning signs we get called for most in Dubai homes and offices.
The whole flat trips when it rains or showers run
An RCD or earth leakage trip means current is escaping to earth. Water heaters, outdoor sockets and wet areas are the usual suspects. It is a safety device doing its job, so find the leak rather than bypassing it.
Sockets that stopped working
A loose terminal, a failed socket or a tripped circuit further back. Often one loose connection feeds several sockets, which is why a whole wall goes dead at once.
Lights that flicker or dim
Lights that dim when the AC kicks in point to a circuit carrying too much load, or a poor connection at the board. LEDs that flicker on their own usually need a matching driver or dimmer.
A warm board or a burning smell
A DB board should never feel warm or smell of anything. Heat means a loose or overloaded connection. Switch off the affected circuit and call the same day.
Scorched or sparking sockets
Brown marks around a socket or a crackle when a plug goes in means the connection behind it is arcing. Stop using it until it has been opened and checked.
What we do
The electrical work we handle
Most electrical visits in Dubai fall into one of these. If you are not sure which yours is, send a photo of the board and the problem.
Fault finding and repairs
Circuits tested to find the actual fault, whether that is a short, an earth leakage, an overload or a loose connection. Then repaired and tested again.
DB boards and breakers
Faulty breakers and RCDs replaced, loose terminals tightened, and boards tidied and labelled so you know which switch does what.
Sockets, switches and new points
Sockets and switches replaced, moved or added, including USB sockets and outdoor points rated for weather.
New circuits and rewiring
Dedicated circuits for heavy appliances and partial rewiring where old cable is undersized for what the flat now runs.
Why it happens here
Why electrical faults are so common in Dubai homes
Most faults we find are not bad luck. They come from the way Dubai flats are used and the climate they are used in.
AC load on circuits never meant for it
Many flats were wired before two or three split units, a large water heater and a home office all ran at once. The cable is not faulty. It is simply carrying more than it was sized for.
Connections that work themselves loose
Terminals warm up under load and cool down overnight. Over months that movement loosens screws, and a loose connection runs hot. Most board faults start this way.
Water where the electrics are
Water heaters, balcony sockets and bathroom fittings are where most earth leakage trips begin, especially after rain or a leak above.
Extension leads doing a circuit's job
Multi-way adapters and extension leads hide how much is running from one socket. The socket gets warm long before anything trips.
Work done by the last tenant
Rented flats pass through several tenants. A socket moved or a light added without testing can leave a fault behind for the next person.
When not to wait
Tripping is annoying, but it is the system protecting you. Heat, burning smells, scorch marks and sparking are different. They mean a connection is failing now, and they should never be left until the weekend.
Switch offthe circuit and call if a board is warm or smells of burning
How it works
From a photo of the board to a fixed circuit
You know the price before anyone opens a socket.
01
01
Send a photo of the board
A photo of the DB board and a line about what is happening. Say which rooms or sockets are affected and when it trips.
02
02
Test the circuit
We test the circuit to find the actual fault, not just reset the breaker and see if it holds.
03
03
Price before work
You get the fault and the price before any repair starts.
04
04
Fix and retest
Repaired, tested again under load, and the board labelled so the next fault is easier to find.
Know the difference
Two ways to deal with a tripping breaker
The quickest electrical visit is a reset. It is also the one that brings the electrician back.
Reset and leave
- Breaker reset and the visit ends.
- No test, so the cause is still there.
- It trips again next week, often at night.
- Each visit is another call-out.
Test and fix
- Circuit tested to find the fault.
- Loose, overloaded or damaged parts fixed.
- Retested under load before we leave.
- One visit, and the problem stays fixed.
Annual contracts
Catch the warm board before it fails
Most electrical emergencies were visible months earlier: a breaker running warm, a socket going brown, a trip that happens once a week. An annual maintenance contract covers scheduled checks across every trade, including the DB board, plus minor callouts as they come up. It suits landlords, holiday-let operators and offices that cannot afford a dead circuit on a working day.
- Scheduled visits across every trade
- Minor callouts included
- One contract, one point of contact
- Priority scheduling through summer
Electricians Across Dubai
No travel charge inside any of these areas.
- Deira
- Bur Dubai
- Al Nahda
- Al Qusais
- Karama
- Satwa
- Jumeirah
- Al Barsha
- Dubai Marina
- JLT
- Business Bay
- Downtown
- Silicon Oasis
- Mirdif
- Sports City
- Discovery Gardens
- Al Warqa
- International City
FAQ
Electrician questions
It depends on the fault and what needs replacing. Send a photo of the DB board and a line about the problem on WhatsApp, and we reply with a price before we visit.
Something on that circuit is drawing too much, or there is a short or a failing part. Resetting it treats the symptom. The circuit needs testing to find which appliance, cable or connection is at fault.
That is usually the RCD or earth leakage protection reacting to water getting into something electrical, often a water heater, an outdoor socket or a fitting near a leak. It needs finding, because the device is doing its job.
Yes. We add sockets, switches and dedicated circuits for heavy appliances such as a new AC unit, water heater or cooker, checking first that the board and cable can take the extra load.
No. A board should never feel warm or smell of anything. Switch off the affected circuit if you can do so safely and call us the same day.
For new cable runs, chasing walls or work in shared areas, most Dubai towers ask for building approval. We raise it with building management for you.
Most of Dubai, including Deira, Bur Dubai, Al Nahda, Al Qusais, Al Barsha, Dubai Marina, JLT, Business Bay, Mirdif and Silicon Oasis, with no travel charge inside any of them.
Book an electrician
Show us the board
A photo of the DB board and a line about what is happening is enough to start. Say which rooms are affected and when it trips, and we reply on WhatsApp with a price.
- Sat to Thu, 8am to 8pm
- Friday from 2pm
- Reply inside 15 minutes
- Cash, card or bank transfer
Other trades
Often booked with an electrician
New sockets and circuits often come with a lighting change or a new AC. Booked together, the trades follow each other.